1.5Ft Cat6 Unshielded Ethernet Network Cable Non Booted Gray

California Prop 65

PVC-Coated Products or PVC-Coated Wires and Cables

Warning: Warning: This product can expose you to chemicals (including but not limited to Styrene, BPA, DIISONONYL PHTHALATE, DINP, etc), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information about California Proposition 65, visit California's Government information page at www.P65Warnings.ca.gov

1.5Ft Cat6 Unshielded Ethernet Network Cable Non Booted Gray. Cat6 Ethernet Patch Cable Assembly Type Patch Cables are tested up to 550 MHz and are ideal for indoor voice, data,...
Availability: 10000 In Stock
Code: C6-117GY-01
0.07 lb

Large Order?

Request Quote

1.5Ft Cat6 Unshielded Ethernet Network Cable Non Booted Gray.

Cat6 Ethernet Patch Cable Assembly Type Patch Cables are tested up to 550 MHz and are ideal for indoor voice, data, video and security networking applications. Whether you are wiring small or large network such as your home, office or entire campus, we have the network solution that is right for you.

This Cat6 Network Assembly Type Patch Cable is the perfect fit for indoor applications. This Network Ethernet patch Cord is made with 8 stranded copper conductors (4-Pairs) with a durable jacket. The ends are terminated with high-quality RJ45 connectors featuring 50 Micron gold-plated contacts. Our Category 6 Assembly-Type Patch Cables are designed for indoor LAN applications, making it a great solution for indoor installation that require the cable to be installed in walls or any other non-plenum areas. This assembly-type cable is also tested to speeds of 550MHz. Our Cat5e Ethernet patch cables quality cords are also great for video streaming, distributing data or voice and are factory tested.

CAT6 Patch Cables Bootless


* Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other Computer Networking applications.

* Certification: TIA/EIA
* T568B (AT&T 258A) Wired
Standard Wiring Pinout
* High-Performance Data Communications Cable
* Category 6 Patch Cable
* Suitable For High-Speed Data Applications, Gigabit Ethernet, Fast Ethernet.
* Designed for Indoor Installations
* Cat6 rated UTP (Unshielded Twist Pair) patch cable
* 24AWG 4pair stranded pure copper wire
* 50 micron gold plated short body RJ45 plug
* UL Listed & ETL
* RoHS compliant



TIA/EIA is abbreviation of Telecommunication Industry Association and Electronics Industry Alliance that sets telecommunication standards in the US. Our patch cable complies with the latest TIA/EIA telecommunication cable standards.
T-568B Wiring

There are two standards for wiring color code, 568A and 568B. While there's no difference in connectivity between 568A and 568B, 568B is the most prevalent wiring color code in the US. Our patch cable is 568B wired.

UTP is Unshielded Twisted Pair and STP is Shielded Twisted Pair. STP cable is wrapped in metal foil or braid. Both have the same Ethernet communication performance, but STP has better protection against Electro-Magnetis noise from outside. UTP is accepted for residential and general commercial installation.
CM rated jacket

CM for communication. It is set by UL (Underwriters labolatory) to indicate the wire jacket material safety. CM rating is safe to use in residential and general commercial installtions.
24AWG and Stranded

AWG (American Wire Gauge) indicates wire thickness. Higher the number, thinner the wire. 24AWG or 26AWG is commonly used for ethernet cables. Stranded wire is a bundle of thin wires as oposed to solid wire that is single solid wire. Stranded wire is more flexible than solid wire and commonly used for indoor network wiring such as patch cable.

Restriction of Hazardous Substances Directive. This directive restricts the use of hazardous materials such as lead or mercury in the manufacture of electronic and electrical equipments. Our cables are all RoHS
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page